Home   Contact Us   Download   
Search:
Home About Us News Products Network Download Feedback Contact
Auto Dignostic Tool
VAG COM
Key Programmer
TMPS/Brake/Adblue
Nitro&ECO OBD2
ELM327 Family
USB to ELM327
ELM327 WIFI
Bluetooth 4.0
Bluetooth 2.0
KONNWEI Scanner
Vgate Scanner
Ancel
Add: Maojia Lijia Wujin Changzhou city
Tel: 86-13813574490
Fax: 86-519-86232529
Email: bestxuncable@aliyun.com
SiteUrl: http://www.bxonelec.com
Your Current Location:Home > Products > Auto Dignostic Tool > lexia3 PP2000 with Diagbox V7.83 with NEC chip
Product Name:lexia3 PP2000 with Diagbox V7.83 with NEC chip
Product Detailed:

Lite Version lexia3 PP2000 with Diagbox V7.83 with NEC chip


Lite Version lexia3 PP2000 with Diagbox V7.83 Software for Citroen/Peugeot

 

PP2000/Lexia-3 Interface works for both Citroen and Peugeot. It is compatible with most of Citroen and Peugeot cars from 1995.It support read identification, read fault codes, clear fault codes, auto-scan etc. Multiple language available.

 

Lexia3 and PP2000 for Citroen/Peugeot Diagnostic with Diagbox V7.83 Software

 

This set contain less cables, without not necessary cables, is simple version of LEXIA-3.

 

LEXIA-3/PP2000 Description:

 

1.It is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 new models.

 

2.It is compatible with most Peugeot cars from 1995..If you have the two types of cars, please pay attention, please check with us first before purchase.

 

3.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

 

LEXIA-3/PP2000 Function:

 

Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

 

1. Read identification

Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

 

2. Read fault codes

Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").

Program supports report printing or copy to clipboard.

 

3. Clear fault codes

this function clears all stored fault codes and other diagnostic information.

 

4. Auto-scan (complete car scan/test)

Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

 

5. Measured Values

Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

 

6. Actuator test

Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

 

LEXIA-3/PP2000 Specification:

 

1.Hardware and software requirements

 

Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.

If customer requires, we can prepare ready to work PC.

 

2.Language

 

English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

 

Package Including:

 

1pc x  Main unit with extension OBD2 cable

1pc x  Long USB cable

1pc x  DVD for Diagbox V7.83 Software


LinkUrl: alibaba store | 
Add:Maojia Lijia Wujin Changzhou city  Tel:86-13813574490    
CopyRight © 2019 Changzhou Bestxun Electronic Co,.LTD  All rights reserved